Samsung PPM42S3 Owner's Instructions Manual page 21

BN68-00457B-01 ENG
2003.10.23 3:21 PM Page 21
+
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm_
Switching On and Off
The mains lead is attached to the rear of your PDP.
_%'-_- If you have purchased this PDP in the United Kingdom,
refer to page 9 for further instructions on plug wMng.
1 Plug the mains lead into an appropriate socket.
Result: The Standby indicator on the front of the PDP lights up.
_ The main voltage is indicated on the rear of the PDP and
the frequency is 50 or 60Hz.
2 Press the" I / _ " button on the front of the PDP (or ON (_)
button on the remote control) to switch the PDP on.
3 To switch your PDP off, press the "1 / (_ " button again (or OFF
button on the remote control).
Choosing Your Language
When you start using your PDP for the first time, you must select the
language which will be used for displaying menus and indications.
1 Press the MENU button.
Result: The main menu is displayed.
2 Press the A or '_ button to select Function.
Result: The options available in the Function group are
displayed.
3 Press the _- button.
Result: The T,anguage option is selected.
4 Press the _- button again.
Result: The languages available are listed.
Select the appropriate language by pressing the • or _ button
repeatedly.
Press the [_*--_ button to confirm your choice.
+