Installing the Display on the Wall Attachment
Panel
This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330.
This installation
guide may be different from the PDP User's manual, Please refer to the proper
installation guide for your product.
•
Do not install the PDP on any place other than vertical walls.
•
To protect the performance
of the PDP and prevent troubles, avoid the followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high voltage.
- Do not install near or around any heating apparatus.
•
Use only recommended
parts and components.
r
=
Wall Mount Bracket
Plastic Hanger
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
_
PPM42S3/PPM50H3
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,,
""
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiill
The wail mount bracket is delivered
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
,
separately.
Pleasetightenthecaptive
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
:
screw in the direction of the arrow after
!
assemblingthebracket.
:::::::::::::::::::::::::::::::::
_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_
PPM63H3
Screws
PPM42S3/PPM50H3:4
=
PPM63H3:6
1
Secure the PDP to the wall mount bracket.
(Please refer to the following instructions.)
2
Set the angle by pulling the upper end of the
PDP attached to bracket in the direction of the
arrow.
3
The angle can be adjusted from 0 ° to 20 ° by
+2 ° '