Filters - Eureka HP5500 Series Owner's Manual

Micron Filter
Inspect the micron filter periodically and change as
needed. For maximum efficiency, replace the micron
filter periodically.
To Replace Micron Filter
1. Push down on latch and pull out on Micron filter
door to remove..
2. Grasp filter and pull out.
3. Place new Micron filter into cleaner.
4. To close, place micron filter door on top of
bottom tab, pivot door up and press door against
cleaner until it latches.
Use replacement micron filter supplied with
Genuine Eureka Style GE-1 bags, PN 62423.
How To Change Light Bulb
(on some models)
CAUTION: Turn off the power switch and
unplug the electrical cord
before changing light bulb.
1. Lower handle to remove two screws from lens
cover.
2. Pull lens cover from cleaner.
3. Support socket with one hand and pull light
bulb straight out to release.
4. Place new light bulb into socket; push to
secure.
5. Push light bulb and socket back so bulb will
not touch lens cover.
6. Replace lens cover.
7. Secure with two screws.
Use Genuine Eureka brand replacement light bulb, 57940-3
12
Latch
Micron
Filter
Micron
Filter
Door
Lens
Cover