Brush Roll Belt ... 10 Customer Order Form ... 11 Warranty ... 13 Lightweight Upright VACUUM CLEANER OWNER’S GUIDE 410 SERIES IMPORTANT Do not return this product to the store. For assembly problems or questions contact: Eureka’s Customer Service Division toll free at 1-800-282-2886*, 7 a.m.
Use only as described in this manual. Use only manufacturer’s recommended attachments. • Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR. AVERTISSEMENT Pour réduire le risque de feu, de choc électrique ou blessure: • N’utilisez pas a l’extérieur ou sur une surface mouillée. •...
Warranty Station. You should know the model, type and serial number or date code when you call: If you prefer, you can write to The Eureka Company, Service Division, 807 North Main St., Bloomington, Illinois 61701, USA. In Canada, write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
HOW TO ASSEMBLE HOW TO USE 3 Position ON/OFF Switch Locked Brush Roll Indicator Power Switch Top position is Off. Middle position is for floor cleaning and cleaning with accessories (brush roll does not turn). Bottom position is for cleaning carpets (brush roll turns). Locked Brush Roll Indicator The brush roll indicator will illuminate brightly when the brush roll motor has been locked up due to debris or some...
HOW TO USE (continued) Cord Retainer When preparing to use vacuum, firmly push the electrical cord down into the cord retainer. This will place the electrical cord out of the way while you vacuum. Handle Collapse Button To collapse the handle from the upright position, press handle collapse button, rotate handle down.
HOW TO USE ACCESSORIES Collapse the handle from the upright position. The dusting brush and upholstery nozzle fit on both the hose and the wand with a built-in crevice tool. Use the dusting brush to dust furniture, blinds, books, lamps, and shelves.
To Change Dust Cup Pleated Filter NOTE: Turn off the switch and unplug the electrical cord before changing the pleated filter. Never operate the vacuum cleaner without the dust cup or the pleated filter. HINT: When cleaning new carpet for the first time, cup will fill quickly. Check often.
How to Empty Dust Cup NOTE: Turn off the switch and unplug the electrical cord before servicing the cleaner. Never operate the vacuum cleaner without the dust cup or filter. FOR INSTRUCTIONS ON HOW TO REMOVE THE DUST CUP FROM THE CLEANER BODY, REFER TO PAGE 8.
HOW TO MAINTAIN CAUTION: Turn off the switch and unplug the electrical cord before servicing the cleaner. Pulleys can be hot from normal use, to avoid burns do not touch pulleys. Replace Brush Roll Belt Remove the 11 screws on the bottom of the power nozzle.
The Eureka Company Will Do The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty. As a matter of warranty policy, the Eureka Company will not refund the consumer’s purchase price.