Table of Contents
Advertisement
6. Place new belt around motor shaft.
7. Place belt around brush roll pulley.
8. Pull right side of brush roll to stretch belt. Secure
right end cap into base.
8
Left side view
9. Align left end cap with square in base. Push end
cap into place; see left side view.
10. Rotate brush roll to seat belt.
11. Replace the hood. Make sure hood front is
behind furniture guard.
12. Tighten screws.
Use Genuine Eureka brand replacement belt, Style
EXT, Part No. 61120A.
10
Disposable Dust Bag and Filters
The disposable dust bag plays a very important role
in the efficiency of a vacuum cleaner. The purpose
5
of the paper bag is to trap dirt. As the bag traps dirt,
it must also be porous enough to allow air to pass
on through. If the paper bag becomes clogged, no
air can pass through the cleaner and no cleaning
can take place regardless of how powerful the unit.
Change the dust bag and check the filters frequently.
Some fine particles can restrict airflow very quickly
and will decrease performance even before the bag
appears to be full.
When vacuuming carpet fresheners or cleaners,
powder, plaster dust, or similar fine substances,
the bag and filters may require more frequent
maintenance.
6
How To Replace Bags – Style GE-1,
PN 62423
7
To Remove Bag:
Bag Cover
Latch
Bag Cover
9
1. Release bag cover by rotating bag cover latch to
CAUTION: Turn off the switch and unplug the
electrical cord before changing
dust bag. Never operate the
vacuum cleaner without the dust
bag or the filter.
the left pointing to the unlock symbol ( ). Pivot
bag cover away from cleaner and remove.
Advertisement
Table of Contents
