Replacing The Toner Modules - NEC 4400 - SuperScript Color Laser Printer User Manual

R
EPLACING THE
Replace each Toner Module when you start seeing print
quality problems such as light images or white streaks across
the page. The Operator Panel will display the TONER
EMPTY message when the toner level is getting low.
To order an NEC SuperScript 4400 Toner Module contact
your NEC printer dealer or see below. The black replacement
modules print approximately 10,000 pages. The yellow,
magenta, and cyan replacement modules print
approximately 6,000 pages each.
Follow these directions to replace the Toner Modules;
1. Open the Front Cover (A).
2. Pull out the Toner Module that needs replacing (B).
3. Hold the new Toner Module horizontally and rock it left
to right three or four times. Then remove the protective
orange cover and tape (C).
4. Insert the Toner Module into its corresponding slot and
close the printer (D).
To order new Toner Modules
Toner Module
Black Toner Module
Yellow Toner Module
Magenta Toner Module
Cyan Toner Module
T M
ONER ODULES
800-632-2326
Part #
20-200
20-201
20-202
20-203
B
D

Replacing the Toner Modules

A
C
93