NEC 4400 - SuperScript Color Laser Printer User Manual page 40

8. Facing the back of the printer, locate the Connector Cable
at the rear of the Paper Tray 2 unit.
9. Remove the Cable Connector Door at the rear of the
printer (D) and plug the cable in to the printer socket (E).
10. Place the Cable Connector Door that you removed from
the printer over the opening on the Paper Tray 2 unit.
Place the Cable Connector Door that you removed in step
3 over the cable plug opening on the back of the printer.
Adding Paper Tray 2 Unit
D
32 SuperScript 4400 Series — User's Guide
11. Snap on the left and right Paper Tray 2 unit covers (F).
12. Reconnect the power and interface cables to your printer.
13. Load paper into your new Paper Tray 2, turn your printer
on and send a print job to the printer using paper from
both trays.
Switch Cable Connector Doors
after connecting cable!
F
E
G