The Message Display - NEC 4400 - SuperScript Color Laser Printer User Manual

The Message Display

The Operator Panel status display is an LCD panel that
shows status messages, alert messages, media types, and
menu selections. When the printer is performing a job, the
display indicates a printer status message, such as
, , etc. The standard display is
PROCESSING PRINTING
meaning the printer is ready for use. The table below lists
Status Message
INITIALIZING Indicates that the printer is initializing.
RESETTING Indicates that the printer settings are being restored to their factory defaults.
WARMING UP Printer is not yet ready to operate. It is performing an initial power up check or the fuser
unit is warming up to operating temperature.
READY Printer is online and ready to print under Auto Emulation Switching mode.
PRINTING Printer is printing a page.
PROCESSING Printer is processing a job.
Printer is waiting for additional input to complete the print job.
WAITING
POWER SAVE Printer is in Power Saving mode. When the printer receives data or you press any button,
MODE
the display restores ordinary printer messages.
Shows the current paper type <
MEDIA TYPE <type>
SELECTED Appears when a setting is selected.
TEST PRINT Printer is printing a test page.
FIRST JOB Start page is printing (if enabled).
RESETTING JOB Printer is resetting a job.
OFFLINE Printer is offline.
PRESS SELECT TO This appears if you press the Online button while the printer is processing a job or waiting
CANCEL JOB
for additional input to complete the print job. Then press the Select button to cancel the job.
52 SuperScript 4400 Series — User's Guide
Status messages with their explanation. Alert messages are
explained on page 104. Service messages require that you call
an authorized service representative. See page 115 for
information about service and technical support.
,
READY
Explanation
> when user presses Media button.
PAPER OR THICK STOCK