Configuring An Initial Http Password; Configuring An Initial Https Password; Startup Menu; Startup Menu Procedures - Dell PowerConnect 5316M User Manual

console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones.
• When initially logging onto a Ethernet Switch Module through a SSH session, enter jones
at the password prompt.
• When changing a Ethernet Switch Module's mode to enable, enter jones.

Configuring an Initial HTTP Password

To configure an initial HTTP password, enter the following commands:
console(config)# ip http authentication local
console(config)# username admin password user1 level 15

Configuring an Initial HTTPS Password

To configure an initial HTTPS password, enter the following commands:
console(config)# ip https authentication local
console(config)# username admin password user1 level 15
When initially enabling an http or https session, enter admin for user name and user1 for password.
NOTE:
Http and Https services require level 15 access and connect directly to the configuration level
access.

Startup Menu

Startup Menu Procedures

The procedures called from the Startup menu cover software download, flash handling and
password recovery.
The Startup menu can be entered when booting the Ethernet Switch Module – a user input must
be entered immediately after the POST test.
To enter the Startup menu:
1
The Ethernet Switch Module is powered on (power is cycled) or reset via the CLI or Web user
interface and the POST is displayed.
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Starting and Configuring the Ethernet Switch Module
51