Supplicant Timeout (1-65535) — The amount of time that lapses before EAP requests are resent
to the user. The field value is in seconds. The field default is 30 seconds.
Max EAP Requests (1-10) — The total amount of EAP requests sent. If a response is not received
after the defined period, the authentication process is restarted. The field default is 2 retries.
Displaying the Port Based Authentication Table
1
Display the Port Based Authentication page.
2
Click Show All.
The Port Based Authentication Table opens:
Figure 7-76. Port Based Authentication Table
Copy Parameters From — The port from which parameters are copied.
Termination Cause — The reason for which the port authentication was terminated.
Copy To — Copies port parameters from one port to the selected ports.
Select All — Selects all ports in the Port Based Authentication Table.
Copying Parameters in the Port Based Authentication Table
1
Open the Port Based Authentication page.
2
Click Show All.
The Port Based Authentication Table opens.
172
Configuring Switch Module Information