Print Process Errors; Resolving A Card Not Fed Error (Cards Will Not Feed Off The Hopper) - FARGO electronics Persona C30 User Manual

RESTRICTED USE ONLY

Print Process Errors

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.

Resolving a Card Not Fed Error (Cards will not feed off the Hopper)

Step Procedure
1 Review the following information.

Symptom: Cards will not feed at all.

Printer Error State: Card is not being detected by the Card TOF Sensor 11
seconds after the initiation of a print job causing the Printer to produce an
error

Driver Monitor Error Display: Unable to Feed Card
Persona C30 Card Printer User Guide (Rev. 2.2)
Fargo Electronics, Inc.
4-4