Resolving A No Ribbon Installed Error - FARGO electronics Persona C30 User Manual

RESTRICTED USE ONLY

Resolving a No Ribbon Installed Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Printer errors out as soon as it receives data from PC

Printer Error State: The Printer RFID Sensor is not receiving a signal from
the Ribbon

Driver Monitor Error Display: No Ribbon Installed
Persona C30 Card Printer User Guide (Rev. 2.2)
Fargo Electronics, Inc.
4-22