Table of Contents
Advertisement
Can't select certain
channel
Channel may be blocked or not approved
in the Parental Controls menu.
If using a VCR, check to make sure the TV/VCR button
on the VCR is in the correct
"mode."
Noisy stereo
reception
May be a weak station.
Use SOUND button
to change to mono mode instead of stereo.
No picture,
no sound
but TV is on
Maybe the cable/air setting
is set to the wrong position.
To fix, select GUIDE Plus+ Gold Menu from the Main menu,
select the Setup option,
and provide the correct information
on the following
screens.
Maybe a vacant channel is tuned.
If watching
VCR (connected
only through
antenna
input), make sure TV is tuned to channel 3 or 4 - same as CH3/4
switch on VCR. Also check to make sure the TVNCR button
on the VCR is in the correct "mode."
Sound
okay, picture
poor
Check antenna connections.
Try adjusting
sharpness function
to improve
weak signals.
If the picture appears to have a double or triple
image or if you notice rings or halos around objects, you may have to
adjust the color convergence.
Details can be found under the Screen menu heading
in the "Using the Menu System" section
of this manual (Projection
TV only).
Black box appears
on the screen
Captioning
may be turned on. Check the Closed-Caption
Display control
panel in the Channel menu.
GUIDE Plus+ IR controllers
not working
Check to make sure the controllers
are positioned
correctly
over the IR remote sensors.
Your remote may be interfering
with the IR controller.
Place a piece of dark tape over the IR controller.
GUIDE Plus+ Gold system control
of cable box is slower than direct control
of the box itself. Keep this in mind when
changing
channels.
Care
and
Cleaning
CAUTION:
Turn OFF your
TV before
cleaning.
You can clean the TV as required,
using a soft lint-free
cloth. Be sure to occasionally
dust the ventilation
slots in the cabinet
to help assure adequate
ventilation.
The TV's screen may be cleaned
with
a soft,
lint-flee
cloth
as well.
Take care not to scratch
or mar the screen.
If
necessary,
you may use a cloth
dampened
with
warm
water.
Never
use strong
cleaning
agents,
such as ammonia-based
cleaners,
or abrasive
powder.
These types
of
cleaners
will
damage
the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also,
avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to
the TV.
I
auti°n:
If fixed (n°n'm°ving)
images are left °n the screen f°r l°ng peri°ds'
they may be permanently
imprinted °n the 1
screen. Such images include network
logos, phone numbers,
and video games. This damage is not covered by your
warranty.
Extended viewing of channels displaying
these images should be avoided.
55
Advertisement
Table of Contents
