Step 3: Connecting The Ir Controller; Attaching The Ir Controllers - RCA F32690 User Manual

STEP3: CONNECTING THE'IR.
CONTROLLER "
The IR (Infrared) Controller.enables' GUIDE Plus+ Gold" to control your
VCR and cablebox (if necessary) so that you can tune to television
channels and even start recording a program •from the program guide.
After you have affixed the ends of the controller to the necessary devices
(VCR, or Cable box),you will use the' on_creen interactive setup routine
for GUIDE Plus+ to test the connected devices.
The iR Controller is used to send commands
to your VCR and/orcable Ix)x,"
ATTACH I NG TH E I R CONTROLLE RS
Some components label the infrared, remote sensor, and others do not. If
your component is labeled, affix the IR controller directly over the
sensor. For components that do not label the rembte sensor, you need to
use to use the component's remote control to locate the sensor.
1. Hold the component's remote €Or;trol (not the remote that came
with your TV) Sothat it is touching the front of the Component.
.
Slowly move the remoteover the front of the component while
pressing the remote power button on and off. (Be sure to press and
release the power button each •time you move the remote. Holding
•the button may not work.)
0
3. Whenthe component turns off or on, you've located the sensor.
4. Affix thecontroller's node directly to the remote sensor.
,ol
...... AU_h _otheC_ Ikx (W yo. have one)
I
i
Tip •
You may want to use a piece of clear
plastic tape to temporarily affix the
controller's node until you have completed
the interactive setup. That way you easily
move it if you have not placed it exactly
over the sensor.
"GqlDEPlus+Gold isa trademarkof Index Svsteminc.The GUIDEPlus. Gold systemismanufactured under licensefrom index SystemsInc. '.-
9