Table of Contents
Advertisement
STEP 3: CONNECTING
THE IR
CONTROLLER
The IR (Infrared)
Controller
enables GUIDE Plus+ Gold" to control
your
VCR and cable box (if necessary) so that you can tune to television
channels and even start recording
a program
from the program
guide.
After you have affixed
the ends of the controller
to the necessary devices
(VCR, or Cable box), you will use the on-screen
interactive
setup routine
for GUIDE Plus+ Gold to test the connected
devices.
The/R Controlleris usedto sendcommands to yourVCR
and/or cable box.
AI-I'ACHING
THE
IR CONTROLLERS
Some components
label the infrared
remote sensor, and others do not. If
your component
is labeled, affix the IR controller
directly
over the
sensor. For components
that do not label the remote sensor, you need to
use the component's
remote control to locate the sensor.
1.
Hold the component's
remote control
(not the remote that came
with your TV) so that it is touching
the front
of the component.
2,
Slowly move the remote over the front of the component
while
pressing the remote power button
on and off, (Be sure to press and
release the power button
each time you move the remote.
Holding
the button
may not work.)
3.
When the component
turns off or on, you've located the sensor.
4.
Affix the controller's
node directly to the remote sensor.
TV
9
Advertisement
Table of Contents
