First Use - Zanussi ZWS 688 User Manual

Programme selector dial, spin speed button and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/
or to select a programme.
Available options:
Spin Reduction
By pressing this button you can change the spin
speed of the selected programme or to select
Rinse Hold or No Spin option.
No spin
By selecting this option, all spinning phases are
suppressed and replaced by a drain, so as not
to wrinkle the laundry. Recommended for ex-
tremely delicate fabrics. On some programmes
the rinses will be performed with more water.
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will be
necessary to empty out the water. To empty out
the water, please read the paragraph «At the
end of the programme».
Prewash
By selecting this option the machine performs a
prewash cycle before the main wash phase. The
washing time will be prolonged. This option is
recommended for heavily soiled laundry.
Super Quick
Short cycle for lightly soiled items or for laundry
which needs only freshening up. We recom-
mend you to reduce the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra

First use

• Ensure that the electrical and water con-
nections comply with the installation in-
structions.
• Remove the polystyrene block and any
material from the drum.
www.zanussi.com
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are al-
lergic to detergents, and in areas where the wa-
ter is very soft.
Start Pause
This button allows you to start or to interrupt the
selected programme.
Delay Start
The start of the programme can be delayed by
3, 6 or 9 hours by means of this button.
Indicator pilot light
A
B
C
When selecting a washing programme both
lights A and B illuminate.
After having pressed the button 5 the only
light corresponding to the running phase
stays on. The machine starts working and the
door is locked.
The light C illuminates at the end of the wash-
ing cycle. After a few minutes the door can be
opened.
If the draining programme is selected any
light will illuminate.
• Pour 2 litres of water into the main wash
compartment
in order to activate the ECO valve. Then
run a cotton cycle at the highest temper-
ature without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
of the detergent drawer
7