Zanussi ZWS 688 User Manual page 14

ber of flashes is different from the ones indica-
ted below, this is related to a fault that you can
not solve. In this case, contact your local Serv-
ice Centre.
Press simultaneously the buttons 4 and 5 for a
few seconds. The red button 5 light will flash for
a short time as described (the green flash is not
to be considered) :
• 4 flashes = «The washing machine does
not start», follow the corresponding sugges-
tions in «Possible cause/Solutions» box and
restart the programme.
• 1 flash = «The machine does not fill», fol-
low the corresponding suggestions in «Possi-
Problem
The washing machine does
not start:
The machine does not fill:
14
• 2 flashes = «The machine does not emp-
Once the problem has been eliminated, press
the button 5 to restart the programme. If after all
checks, the problem persists, contact your local
Service Centre.
The door has not been closed (the button 5 red light blinks).
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and/or the button
5 has not been pressed.
• Please turn the selector dial and/or press the button 5 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The water tap is closed (the button 5 red light blinks).
• Open the water tap.
The inlet hose is squashed or kinked (the button 5 red light blinks).
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 5
red light blinks).
• Clean the water inlet filters (see 'Cleaning the water inlet filters' for
more details).
The door is not properly closed (the button 5 red light blinks).
• Close the door firmly.
ble cause/Solutions» box and restart the pro-
gramme.
ty and/or does not spin», follow the corre-
sponding suggestions in «Possible cause/
Solutions» box and restart the programme.
Possible cause/Solution
www.zanussi.com