Zanussi ZWG 6165 User Manual page 15

Check carefully whether the pump impeller rotates (it
rotates jerkily). If it doesn't rotate, please contact your
Service Centre.
Put the cap back on the emergency emptying hose
and place the latter back in its seat.
Caution! When the appliance is in use and
depending on the programme selected there can
be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When refitting the pump cover, ensure it
is securely re-tightened so as to stop leaks and young
children being able to remove it.
Remove foreign bodies
and fluff from the filter
seat and from the pump
impeller.
Replace the filter into the
pump by inserting it cor-
rectly into the special
guides. Screw the pump
cover firmly by turning it
clockwise.
Close the pump door.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, takes long to fill
with water, the starting button blinks yellow or the
display (if available) shows the relevant alarm (see
chapter "What to do if..." for more details), check if the
water inlet filters are blocked .
To clean the water inlet filters:
• Screw the hose back onto the tap. Make sure the
connection is tight.
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or
with the piece of cloth.
35°
• Screw the hose back to the machine and make
sure the connection is tight.
• Turn on the water tap.
Frost precaution
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Turn off the water tap.
• Unscrew the hose
from the tap.
• Clean the filter in the
hose with a stiff brush.
45°
15