Edimax Wireless LAN Access Point User Manual page 10

as following example.
ü
ü
7.
Click OK to confirm the setting. Your PC will now have the IP Address you specified.
2. Enter 192.168.2.1 from Web Browser to get into the Access Point's
configuration tool.
3. A screen will be popped up and request you to enter user name and password.
The default user name and password is as follows.
User Name: Admin
Password: 1234
Enter the default user name and password, then press OK button directly.
4. You can start configuring the Access Point.
From Wireless Station
1. Make sure your wireless station is in the same subnet with the Access Point.
Please refer to the step 1 above for configuring the IP Address and Sub Mask of
the wireless station.
IP Address: Select Specify an IP address. Specify the IP Address and Subnet Mask
IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is
available, do not setup 192.168.2.1)
Subnet Mask: 255.255.255.0
DNS: Let all fields are blank.
WINS: Let all fields are blank.
Routing: Let all fields are blank.
Wireless LAN Access Point Configuration
8