3-4-1-3 Ap Bridge-Point To Point - Edimax BR-6428HPn User Manual

Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
3‐4‐1‐3 AP Bridge—Point to Point
"AP Bridge—Point to Point" mode connects this router to another router and allows all the
computers connected to the LAN ports of both routers to communicate with each other.
Please note that when you select this mode, this broadband router will act as a wireless
bridge only. It will not accept other wireless clients. If you wish to use this function with a
wireless access point that supports WDS, please select "AP Bridge—WDS" mode.
Item Name
Band
Description
Select from one of the following options:
2.4GHz (B): Allows 802.11b wireless network clients
to connect to this router.
2.4GHz (N): Allows 802.11n wireless network clients
to connect to this router.
2.4GHz (B+G): Allows 802.11b and 802.11g wireless
network clients to connect to this router.
2.4GHz (G): Allows 802.11g wireless network clients
41