Web Pages And Folders; Basic Setup; Switch Information - D-Link DGS-3312SR Product Manual

In the Welcome page, click on the Login hyperlink; this opens a login dialog box. Enter a user name and password to
access the Switch's management main page (pictured above). There is no user name or password configured for the Switch
in the default settings, so if this is the first time logging in it is not necessary to enter these.

Web Pages and Folders

Below is a list and description of the main folders and windows available in the web interface:
Configuration: This folder includes all the sub-folders and windows used to configure various performance functions
of the Switch including Layer 3 functions.
Security: This folder contains SSL, SSH, and Access Authentication Control sub-folders are also located here. The
Trusted Host window link is located here as well.
Management: The windows used to configure SNMP settings, management IP stations, and user accounts are located
here.
Monitoring: This folder includes stack information and data tables for performance statistics, application, and protocol
status, including Layer 3 functions.
Maintenance: Contains windows for upgrading firmware and saving configuration files (TFTP Services), saving
configuration changes, resetting and rebooting the Switch, PING test, and logging out of the web manager.
Single IP Management: SIM settings, Topology, Firmware Update, and Configuration Backup/Restore windows are
located here.

Basic Setup

The subsections below describe how to change some of the basic settings for the Switch such as changing IP settings and
assigning user names and passwords for management access privileges, as well as how to save the changes and restart the
Switch.

Switch Information

The first page displayed upon logging in is the System Information (Basic Settings) window. This window can be
accessed at any time by clicking the Switch Information button in the Configuration folder.
DGS-3312SR Gigabit Layer 3 Switch
NOTICE:
Any changes made to the Switch configuration during the current
session must be saved in the Save Configuration window (explained below) or
use the command line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.
22