Adding Vlans To Teams - Dell Broadcom NetXtreme Family of Adapters User Manual

Broadcom netxtreme ii network adapter user guide
Hide thumbs Also See for Broadcom NetXtreme Family of Adapters:
Table of Contents

Advertisement

Virtual LANs: Broadcom NetXtreme II Network Adapter User Guide
separation between all of them.
Accounting
Available to VLAN #3 only. The Accounting Server is isolated from all traffic on VLANs #1 and #2. The switch
Server
port connected to the server has tagging turned off.
Attached to a shared media hub that is then connected to the switch. PCs #1 and #2 belong to VLAN #2 only,
PCs #1 and
and are logically in the same IP subnet as the Main Server and PC #5. The switch port connected to this
#2
segment has tagging turned off.
A member of VLAN #1, PC #3 can communicate only with the Main Server and PC #5. Tagging is not enabled
PC #3
on PC #3 switch port.
A member of VLAN #3, PC #4 can only communicate with the servers. Tagging is not enabled on PC #4 switch
PC #4
port.
A member of both VLANs #1 and #2, PC #5 has an Broadcom adapter installed. It is connected to switch port
PC #5
#10. Both the adapter and the switch port are configured for VLANs #1 and #2 and have tagging enabled.
NOTE: VLAN tagging is only required to be enabled on switch ports that create trunk links to other switches, or on ports
connected to tag-capable end-stations, such as servers or workstations with Broadcom adapters.

Adding VLANs to Teams

Each team supports up to 64 VLANs (63 tagged and 1 untagged). Note that only Broadcom adapters and Alteon
adapters can be part of a team with VLANs. With multiple VLANs on an adapter, a server with a single adapter can have a
logical presence on multiple IP subnets. With multiple VLANs in a team, a server can have a logical presence on multiple IP
subnets and benefit from load balancing and failover. For instructions on adding a VLAN to a team, see
Windows operating systems.
NOTE: Adapters that are members of a failover team can also be configured to support VLANs. Because VLANs are not
supported for an Intel LOM, if an Intel LOM is a member of a failover team, VLANs cannot be configured for that team.
Please read all
Restrictions and
Back to Contents Page
file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/vlan.htm[9/26/2012 3:28:33 PM]
Disclaimers.
®
AceNIC
Adding a VLAN
for

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadcom netxtreme ii

Table of Contents