Craftsman 911633 Owner's Manual page 5

TOOL USE AND CARE
POWER TOOL SAFETY
PERSONAL SAFETY
Contain long hair. Keep your
hair. clothing and gloves away
from moving parts. Loose
clothing. jewelry or long hair can
be caught in moving parts.
Avoid accidental starting. Be
sure switch is OFF before
plugging in. Carrying tools with
your "l1lger on the switch or
plLJggJng In tools that have the
SWitch ON invites accidents.
Remove adjusting keys or
wrenches before turning the
tool ON. A "Hench or key that is
left attached
10
a rotating part of
the tool may result in personal
injury
Do not overreach. Keep proper
footing and balance at all
times. Proper footing and
balance enables better control of
the tool
III
unexpected situations.
Use safety equipment. Always
wear
eye
protection. Dust mask,
non-skid safety shoes, hard hat
or hearing protection must be
used for appropnate conditions.
Use clamps or other practical
way to secure and support the
workpiece to a stable platform.
Holding the work by hand or
against your body is unstable
and may lead to loss of control.
Do not force the tool. Use the
correct tool for your
application. The correct tool will
do the job better and safer at the
rate for which it is designed.
Do not use the tool if the
switch does not turn it ON or
OFF. Any tool that cannot be
controlled with the switch is
dangerous and must be repaired.
Disconnect the plug frOlT\ the
power source before making
any adjustments, changing
accessories or storing the tool.
Such preventive safety measures
reduce the risk of starting the tool
accidentally
Store idle tools out of reach of
children and other untrained
persons. Tools are dangerous in
the hands of untrained users.
5