Setting Up Your Machine - Singer 7258 Instruction Manual

SETTING UP YOUR MACHINE
Be sure to wipe off any excess oil from needle plate area before using your machine the first time.
I NOTE: This machine can be used either with or without foot control.
WHEN USING POWER LINE CORD ONLY
Connect the plug of the power line cord into the cord socket (1)
and your wall outlet (2) as illustrated (A).
WHEN USING POWER LINE CORD AND FOOT
CONTROL
Connect the plug of the power line cord into the cord socket (1)
and your wall outlet (2) as illustrated (B).
Connect the foot control plug into the machine socket (3).
®
/
i
/
/
/
Set power/light switch at "OFF"
Mettez l'interrupteur moteuri
lumiere sur "OFF"
Poner et Interruptor de corriente/
tuz de velocidad en "OFF"
i
,,/
\
Power line cord
Cordon
Cord6n de la linea electrica
Set power/tight switch at "OFF"
(_ Mettez l'interrupteur moteurilumiere sur "OFF".
Poner el Interruptor de corriente/luz de velocidad en "OFF'
Pin plug
Pasador
Machine socket
Connecteur de ta machine
Conector de la maquina
Power lin_ecord
Cordon
Cord6n de la linea electrica
Foot control
Rheostat
Control por pedal
Always disconnec t the machine from power
supp!y bY removing the p!ug from the wal!-0utlet:
POWER/LIGHT SWITCH
Your machine wilt not operate until the
power/light switch is turned on. The same
switch controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
Power/tight switch "OFF"
Interrupteur moteur/tumiere "OFF"
Interruptor corriente/luz "OFF"
Power/tight switch "ON"
Interrupteur moteuritumiere "ON"
Interruptor corriente/luz "ON"
i °_ _ j
i o i
J
10