Connecting A Pc - Sharp Aquos LC-70LE734U Operation Manual

Connecting to E×ternal Equipment
Refer to page 56 for a list of PC signals compatible with the TV.
When using HDMI cable (HDMI 1, 2, 3 or 4}="
HDMI-certified cable
Back panel
vertical in _uts
I ks, 1,4_rnl I
I tJ M_l'nl I
I _ 1.4_rtnl I
Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable
to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMl+Analog". (See page 56.)
• The HDMI terminals only support digital signal.
m When using DVI-HDMI conversion cable (HDMI 1}=" Back panel
horizontal inputs
t_t__ " © 3.5 mm stereo minijack_ _
_-[ Back panel
vertical inputs
_ DVI-HDMI conversion cable_ __
When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 tern_inal, connect a G 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMl+Analog". (See page 56.)
m When using analog RGB cable (PC IN}:
Back panel
surface inputs
Analog RGB cable F_G_I
(D-sub 15-pin cable or VGA cable)
_f_L_________'-m _ © 3.5 mm stereo minijack cable
Back panel
horizontal inputs
When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 56.)
Q-16