Tv (Rear/Side) - Sharp Aquos LC-70LE734U Operation Manual

introduction to Connections
An HDTV without an HD source is just an ordinary TV.
To enjoy ND images on the TV, you should get ND programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
HD compatible external equipment
o For information on updating to HD programming, ask your cable/satellite service provider.
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
o The illustrationsof the terminals are for explanation purposes and may vary slightlyfrom the actual products.
HD HDMI-certified cable I@ _
Quality _
_ •
Page
13
Hii_ rirll!
AUDIO
DVI OUT
COMPONENT
R® ®L
AUDIO
O 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
Component video cable
Audio cable
Standard
Quality AUDIO VIDEO
R-AUDIO-L
,®®
AV cable
............. in
,,_Page 13
,,_Page 14
Page 14
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
Example 1 Press INPUT.
* The INPUT list screen displays.
2 Press A/T to select the input source.
iNPUT
AQUOS
NET APPS
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 ,_ HDMI2-_, HDMI3
t
TV _- HDMI4
An image from the selected source automatically
displays.
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Q-12