Information - Sharp Aquos LC-70LE734U Operation Manual

On=Screen Display Menu
Example
AQUOS I
NET APPS
1 Press MENU to display the MENU screen, and then
press 41/1_ to select "Initial Setup".
2 Press A/V to select a specific adjustment item,
and then press ENTER.
o When you select "EZ Setup", "OHSetup", "Parental
CTRL" or "Reset",you can enter the 4-digit secret
number here. Seepage 34 for setting a secret number.
3 Press A/V (or 41/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: "PowerSaving" is setto "Advanced", and AV MODE is
setto "S]ANDARD",
Store: "PowerSaving"is set to "Off"and AVMODEis set to
"DYNAMIC (Fixed)". P ictureResetandFeatureDemocan be set.
Picture Reset: AV MODE will be set to "DYNAMIC(Fixed)"
regardlessof whether Picture Reset is "On" or "Off". If you
select "On", AV MODEwill be resetto "DYNAMIC(Fixed)"
if there is no operation for 30 minutes,When "Off" is
selected, AV MODEwill be set to "DYNAMIC(Fixed)",
Feature Demo: When "On" is selected, after all the settings
are completed, the FeatureDemo screen is displayed if
there is no operation for several minutes,
® ENERGYS]AR qualification is based on AV MODE
"S]TkNDARD".
Antenna & Cable/STB: Select the type of connection
you will use to watch TV.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
® If "Cable" is selected for Antenna setting, scrambled
channels are removed after the Channel search has been
completed,
Completed: The settings confirmation screen is displayed.
Confirm the information displayed on the screen.
o See Initial Installation on pages 17 to 19 for setting each item.
If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels, (Channelselection disabled using CH
A/V,)
off: Does not skip channels,(Channelselectionenabled using
CHA/V,)
Remove Scrambled CH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes: Starts to removescrambled channels.
No: This function does not work,
See Initial Installation on pages 17 to 19 for setting each item.
If no channel is found, confirm the type of connection
made with your TV and try channel search again.
If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
Q- 33