Other Functions - Sherwood RD-6108 Owner's Manual

RD-6108(A) 2003.3.4 3:54 PM _-t101Xl22
Start recording on the VIDEO 1.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video signal
ti"om the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
Note : Be sure to observe the order of the above steps
1 and 2.
OTHER FUNCTIONS i
_ompressing the dynamic range (Dolby Digital sources only)
•This function compresses the dynamic range of previously
specified parts of the Dolby Digital sound track(with
extremely high volume) to minimize the difference in
volume between the specified and non-specified parts.
This makes it easier to hear all of the sound U'ack when
watching movies at night at low levels.
•When the digital signals from Dolby Digital program
source m'e input in available SmTound mode.
DYNAMIC
RANGE
• Each time this button is pressed, the mode changes
and disappears in 3 seconds as follows:
D_YNR 0.0 : Off
NR0.5 Low compression
D_NR 1.0 High compression
• In some Dolby Digital software, this function may
not be available.
Operating the sleep timer
• The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting oft'.
• To set the receiver to automatically turn off after
the specified period of time.
• Each time this button is pressed, the sleep time
changes and disappears in 3 seconds as follows;
_10--_20--)30--_60--+90--+0FF q
Unit : minutes
• While operating the sleep timer, "SLEEP" lights up.
Adjusting the brightness of the
fluorescent displays
• Each time this button is pressed, the brighmess of
fluorescent display changes as tUllows;
ON+ dim OFF
q
• In the display OFF mode, pressing any button will
restore the display ON mode.