Changing The Channels - Sharp LC-20E1U Operation Manual

BASIC OPERATION (Continued)
Changing channels by using Channel Select on the remote control
I • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
_CH
- C;/e_t el
W
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
1 Press the _ button.
2 Press the _ button.
• When selecting a 1-digit channel number,
do not fail to press the _ button first.
0-]
\ ']11-
115
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1
Press the _ button.
2 Press the _ button.
3 Press the _ button.
• The 3-digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
27.)
Changing channels with OH (_)/(v) on the remote control
Air Press CH (A) and the channels change in the order shown below:
2-e3-_,,,-_68-e69-e2-->3-e ..
Press CH (v) and the channels change in the order shown below:
3-e 2-_ 69-e 68-e...-e 3-> 2-e...
Cable Press CH (A) and the channels change in the order shown below:
1 -e 2-_ 3-_,,. -e 125-el -e 2 =e 3-e., ,
Press CH (v) and the channels change in the order shown below:
3->2-->1 -e 125-e...-e 3-e 2-_ 1 -e,,.