Remote Control; Basic Operation - Sharp LC-20E1U Operation Manual

REMOTE CONTROL
BRIGHT (p. 21)
MUTE (p. 17)
VOL(+)/(-) (p. 17)
CR (A)/(V)
(p. 18)
MTS *s (p. 17)
FLIP (p. 22)
MENU/
/V/<I/I_ (Cursor control)
CC (CLOSED CAPTION)
(pp. 30, 31)
rV/VlDEO (p. 16)
FLASHBACK .2
--Channel Select (p. 18)
.4 Displays the receiving chan-
nel for 10 seconds.
.2 Returns to the previous
channel.
*3Selects audio settings.
BASIC OPERATION
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil,
Argentina and Uruguay, set the color system according to the country before using this product by
following the table below.
Country
TV broadcasting
system
Color: NTSC
U.S.A.
TV ch: US ch
Canada, Mexico, Color: NTSC
Latin America TV ch: US ch
Color: PAL-M
Brazil
TV ch: US ch
Argentina, Color: PAL-N
Uruguay TV ch: US ch
Factory setting of color system
TV Video
NTSC (N358) NTSC (N358)
US ch US ch
NTSC (N358) NTSC (N358)
US ch US ch
NTSC (N358) NTSC (N358)
US ch US ch
NTSC (N358) NTSC (N358)
US ch US ch
User setting
TV/Video
Not required
or N/A
Not required or N/A
Set color system to
PAL_M (see page 25)
Set color system to
PAL-N (see page 25)
/
• The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video
mode.
*The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding.