Table of Contents
Advertisement
Changing the Channels
Changing channels using the CHANNEL SELECT on the remote control
• To handle the increasing number of channels available, this LCD TV set allows you to select up to
100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
POWER
SLEEP
VOL
MPX
Changing channels with the CH (
Press the CH (
1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .
Press the CH (
3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .
Downloaded from:
http://www.usersmanualguide.com/
BASIC OPERATION (Continued)
To select a one-digit channel
(e.g., Channel 5):
DISPLAY
1
BRIGHT
2
MENU
TV/VIDEO
CH
CH (
)/
(
)
CHANNEL
SELECT
-/--
To select a two-digit channel
(e.g., Channel 15):
1
2
3
Note:
■
) and the channels change in the order shown below:
) button and the channels change in the order shown below:
Press the
button.
If "5–" is indicated and the picture
does not change, press the
button to switch over to the 1-digit
select mode and press
Press the
button to set the 2-
-/--
digit select mode.
Press the
button.
Press the
button.
Complete this procedure within 4 seconds,
otherwise the selection will not be made.
)/(
) on the remote control.
-/--
again.
B/G
B/G
13
Advertisement
Table of Contents
