Turning On Power; Switching Tv/Video [Avi/Av2/Component/Tv] Modes - Sharp LC-20E1U Operation Manual

BASIC OPERATION (Continued)
MAIN POWER
I
1 Press MAIN POWER, located on
the upper side of the main unit, to
on.
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
• The input mode indication disappears after
several seconds.
• On-screen display
2
_STESEO <OHAI8
SAP
MOHO
POWER indicator
__/VIDEO
1 Turn on the power of the con-
nected video equipment.
2 Press TV/VIDEO and select the
applicable input source. The
screen displays AV1, AV2, COM-
PONENT or TV mode each time
TV/VIDEO is pressed.
• The AV input mode indication remains
for 3 seconds.
• AVI: Video equipment connected to the
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2:AV2 mode is used to adjust the
preset settings and IN or OUT
can be selected. AV2 indication is
not displayed when OUT is
selected. (For details on setting
AV2-1N/OUT, see page 26.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
AV1 mode
!
AV2 mode
AV2
!
COMPONENT mode
COMPONENT
TV mode
12
!
m
m