Direct Button Operation; Changing Channels - Sharp AQUOS 4T-80CJ1U Operation Manual

>>

Direct Button Operation

<<

Changing Channels

You can change channels in several ways.
Method 1
Using CH /
on the remote control unit or on the TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel
5):
Press 5 ENTER
To select a 3-digit channel number (e. g., Channel 115):
Press 1 1 5 ENTER
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 2 • (DOT) 1 ENTER
ENG 3-1
NOTE
When selecting a 1-digit channel number, it is not necessary
to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
if you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.