Sharp AQUOS LC-40LE810UN Operation Manual page 61

Appendix
• Before detaching (or attaching) the stand, unplug the AC cord.
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
LC=40LE810UN/LC-46LE810UN/LC=52LE810UN
Before attaching/detaching the stand
,, Before performing work, make sure to turn off the TV.
,, Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
I
i i ,
Loosen the screw used to secure the stand cover
and remove the cover.
2
(1._Unfasten the four screws used to secure the
stand in place.
(9 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
To attach the stand, perform the above steps in reverseorder.
m LC=60LE810UN
Before attaching/detaching the stand
Before performing work, make sure to turn off the TV.
1 2
Loosen the screw used to
secure the stand cover.
_} Remove the cover.
Unfasten the four screws used to
secure the stand in place.
3
Detach the stand from the TV.
To attach the stand, perform the above steps in reverse order.
Q- 60