Watching Tv; Initial Installation - Sharp AQUOS LC-40LE810UN Operation Manual

Watching TV
Press POWER on the TV or on the remote control unit to turn the
power on.
POWER
DISPLAY_[_Is%OW_I
DVD,VCR AUDIO
POWER
(On/Standby)
o The Initial Installation starts when the TV powers on for the first time. If the
TV has been turned on before, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, perform "EZ setup" on the Initial
Setup menu on page 30.
Press POWER on the TV or on the remote control unit again to turn the
power off.
o The TV enters standby and the image on the screen disappears.
o If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
ENERGY STAR qualification is based on AV MODE "STANDARD"
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
3 Press _/_ to select "Air" or "Cable".
Press ENTER to enter the setting.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Aouos
NET DOCK
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1 Press A/V to select the desired language listed on the
screen, and then press ENTER.
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
4. When "Air" is selected in Antenna setting:
Press 41/1_ to select "Start", and then press ENTER.
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifies for ENERGY STAR in
Home mode default setting.
2 Press _/_ to select "Home" or "Store".
Press ENTER to enter the setting.
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)", Picture Reset and Feature Demo can
be set,
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off", if you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)",
Feature Demo: When "On" is selected, after all the settings are
completed, the Fealure Demo screen is displayed if there is
no operation for several minutes,
When "Cable" is selected in Antenna setting:
Press A/Y to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
= The Channel search will start automatically.
= To exit the Channel search screen, select "Cancel", and
then press ENTER.
o If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
(See page 30.)
For changing the settings of the Initial Installation, perform
"EZ setup" on the Initial Setup menu on page 30.
Q-17