Table of Contents
Advertisement
USII_JGTHE
SB13/SR23
COMPUTER
m Auto Shut-Off{Sleep Mode)
The console will automatically shut off in approximately
2 minutes without
use or input. There is no on/off switch. (Press any button to power up the
console and "ENTER PROGRAM"
appears in the alphanumeric
display.)
m information
Mode
The computer enables you to switch between English or Metric units
by pressing and holding the UP and DOWN buttons simultaneously
for 3 seconds.
Use the UP or DOWN button to select "ENGLISH"
or
"METRIC"
and press ENTER to confirm.
The computer will enter the
Information Mode.
In the Information Mode, by following the displayed
menu and prompts, you will be able to:
Select ENGLISH measurement
units which sets the computer for:
•
Miles
•
Miles/hour
•
Pounds
•
Inches
Or select METRIC measurement
units which sets the computer for:
•
Kilometers
•
Kilometers/hour
•
Kilograms
•
Centimeters
See Total Distance
See Total Hours
Press ENTER and then the software version will display. Press ENTER
again to exit the Information
Mode and the computer
will bring you to the
"ENTER PROGRAM"
mode.
m Grip
Heart
Rate
This Schwinn
® bike is equipped
with
grip heart rate sensors
located
on
the handlebars.
You must
contact
these
sensors
with
both
hands
so the
computer
can detect
your
pulse.
The computer
uses information
detected
by the grip heart rate sensors
for many
of the software
features.
Make
sure you are griping
the pods
and look for the flashing
"heart"
icon and
pulse rate located
on the lower
right
portion
of the LCD display
(to the left
of the CYCLIST
icon) indicating
that a pulse signal
is being
received.
This is
extremely
important
for the Heart
Rate Control
and Fitness
Test programs.
The computer
must
receive
a steady,
consistent
signal for the duration
of
these
programs
to operate
correctly.
If there
is no display
please
see the
section
titled
"IMPORTANT
Things You Should
Know
Before
Exercising"
for
more information.
15
Advertisement
Table of Contents
