Samsung Series 4+ 430 User Manual page 16

Basic Features
Ill Color Space (Auto / Native): Adjust the range of colors
available to create the image.
Ill White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's (red,
green, blue) darkness,
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Ill Flesh Tone: Emphasize pink "Flesh Tone."
Ill Edge Enhancement (Off / On): Emphasize object
boundaries.
P!cture Opt!c ns..................................................................................................................................................................
(_ MENU iTR_ Picture --_ Picture Options --_
ENTER I_
Ill Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic or Standard.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Ill Size: If you have a cable box or satellite
receiver, it may have its own set of
screen sizes as well, However, we highly
recommend you use 16:9 mode most of
the time,
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture so it
fits the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not set your TV to 4:3 format for a long time.
The borders displayed on the left and right, or
top and bottom of the screen may cause image
retention (screen burn) which are not covered by
the warranty,
Screen Fit: When your TV inputs HDMI (720p / 1080i /
1080p) or Component (1080i / 1080p) signals, displays
the full image without any cut-off.
NOTE
To use the Position function after selecting Zoom1,
Zoom2 or Wide Fit, follow these steps:
1. Press the I_ button to select Position.
2. Press the ENTERIZ_ button.
3. Press the A or T button to move the picture up
or down.
4. Press the ENTERIZ_ button.
5. Press the _ button to select Reset.
6. Press the ENTERIZ_ button to reset the picture
to its default position.
* To use the Position function after selecting
Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) follow these steps:
1. Press the _ or I_ button to select Position.
2. Press the ENTERI_ button,
3. Press the A, _r, _ or I_ button to move the
picture.
4. Press the ENTERE_ button.
5. Press the _ or I_ button to select Reset,
6. Press the ENTERI_ button,
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* You can adjust and store settings for each external
device you have connected to an input on the TV,
Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the
Digital Noise Filter feature to reduce any static and
ghosting that may appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
6 English