Remote Control - Samsung PN50B850 User Manual

Remote Control
You can use the remote control up to a distance of about 23 feet from the TV,
The product color and shape may vary depending on the model,
The performance of the remote control may be affected by bright light,
r
PO_WER TV 0N/0FF
,D- Q a]
',
SAMSUNG
O
0
Q
O
0
Q
0
POWER
Turns the TV on and off.
TV
Selects the TV mode directly.
NUMERIC BUTTONS
Press to select a channel.
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
"54-3", press "54", then press " - J" and "3".
OH LIST
Use to display Channel Lists on the screen.
MENU
Displays the main on-screen menu.
TOOLS
Use to quickly select frequently used
functions.
Q UP_/DOWNY"/LEFT_ /
RIGHTI_ / ENTER_
Use to select on-screen menu items and
change menu values.
INTERNET@
This function enables you to view
Internet@TV.
@ COLOR BUTTONS
Use these buttons in the Channel list,
Media Play, and Internet@TV, etc.
@ SOURCE
Press to display and select the available
videosources.
Press to increase or decrease thevolume.
@
MEDIA.P (Media play)
This function enables you to view and play
photo and music files from an external
device. (Refer to pages 42 (Photo), 45
(Music) and 47 (Movie))
@
@
INFO
Press to display information on the TV
screen.
I[_ MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
_) Use these buttons in the DMA, Media Ptay
and Anynet+ modes.
( !_: This remote can be used to control
recording on Samsung recorders with the
Anynet+ feature)
_) 9 ON/OFF
Press to backlight thebuttons on the remote.
Thisfunction isconvenient forusingat night
orwhen theroom isdark.(Usingthe remote
control w iththeON/OFF(C_)lightbuttonset
toOn will r educe thebattery usage time.)
@ PRE-CH
Tunes to the previous channel.
_) FAV.C H
Press to switch to your favorite channels.
_) RETURN
Returns to the previous menu.
6) EXIT
Press to exit the menu.
Press to change channels.
_)
_MUTE
Press totemporarily c utoffthesound.
@ P.SlZE
Picture size selection.
I_) CONTENT
This function enables you to view Content
Library.
CC
Controls the caption decoder.
C) installingBatteries in the Remote Control
1, Lift the cover at the back of the remote control upward as shown in the figure.
2, Install twoAAA size batteries.
@ Make sure to match the "+" and "-" ends of the batteries with the diagram inside the
compartment.
3, Close the cover as shown in the figure.
@ Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time. (Assuming typical TV usage, the batteries should
last for about one year.)
@ Using the remote control with the ON/OFF(:_) light button set to On will reduce the
battery usage time.
If the remote control doesn't work, check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?