Setting The Time - Samsung PN50B850 User Manual

Setting the Time
[_ Clock
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the INFO button.
[_ If you disconnect the power cord, you have to set the clock again.
Clock Mode
You can set up the current time manually or automatically.
• Auto : Set the current time automatically using the time from the digital broadcast.
• Manual : Set the current time to a manually specified time.
Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set to Manual.
You can set the Month, Day, Year, Hour, or Minute directly by pressing the number
buttons on the remote control.
Time Zone
You can select your time zone.
The Antenna or cable must be connected in order to set the time automatically.
DTT (Daylight Saving Time) _ Off / On / Auto
You can switch the Daylight Saving Time function on or off.
Time Zone, DST function are only available when Clock Mode is set to Auto.
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(30, 60, 90,120,150 and 180 minutes).
Off/30 rain. / 60 rain. / 90 rain. / 120 rain. / 160 rain. / 180 rain.
[_ To cancel the Sleep Timer function, select Off.
Press the TOOLS button to display Tools menul
You can also set the sleep timer by selecting Tools _ Sleep Timer:
C)
Timer 1 / Timer 2 ! Timer 3
Use this feature to set the TV to turn on or off at a desired time. 3 different On/Off times
can be set. You must set the clock first.
• On Time: Set the Hour, Minute, am/pro, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to Activate.)
• Off Time: Set the Hour, Minute, am/pro, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to Activate.)
• Volume: Set the desired volume level.
• Source : You can select the TV, TV Memory or USB device content to be played when
the TV turns on automatically. Select TV, TV Memory or USB. (Make sure that an USB device is connected to your TV.)
When you select the TV, you can set the Antenna and Channel.
- Antenna : Selects Air or Cable.
- Channel : Selects the desired channel
When you select the TV Memory or USB, you can set the Contents.
- Contents : Selects the desired contents on the TV memory or USB.
The folder name can be a maximum of 64 English characters or digits long.
If the folder name is too long, the folder can not be selected.
When executing automatic power-on and 2 USB devices that have same manufacturer and folder name are simultaneously
connected, the wrong USB device may be read. If you are using two of the same type USB device, be sure the folder names
are different so the correct USB is read.
When there is only one photo file in the USB or the TV Memory, the Slide Show will not play.
• Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat, Sat-Sun or Manua!.
When Manual is selected, press the I_ button to select the desired day of the week.
Press the ENTER_ button over the desired day and the _/ mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by
the timer. This function is only available in timer On mode and prevents overheating,which may occur if a TV is on for too long time.
Continued...