Network Connection - Samsung PN50B850 User Manual

i Network
Network Connection
Network Connection is for DLNA, Contents Library-lnternet download, Jnternet@TV and Home Network Centre,
Network Connection=Cable
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below.
Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter
them manually.
The Modem Port External Modem
on the Wall (ADSL/VDSL/Cable TV)
TV Rear Panel
Modem Cable
1. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.
2, Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router).
External Modem
The Modem Port (ADSLNDSLt
on the Wall Cable TV)
IP Sharer
TV Rear Panel
You can connectthe LAN portandthe TV directly depending on yournetwork status.
TV Rear Panel
The LAN Port
ontheWall
LAN Cable
The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds
and then try again.
For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding
product.
You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
You cannot use a manual-connection-type ADSL modem because it does not support DHCR You have to use an automatic-
connection-type ADSL modem.