Recording - Samsung PN50B850 User Manual

[3 TV Remote Control ButtonsAvailablein Anynet+Mode
DeviceType .... 'l Operating Status '_-_'_'__'_'_ ............................. Available Buttons _'_ _'
After switching to the device, when the Numeric buttons
menu of the corresponding device is A./T/_/m,-/ENTER_ buttons
Anyner Device ............................................ €o!o! bu!!°ns !,EX!T bu!! on .............................................................
After switching to the device, while _"_ (Backward search) / :;(Forward search) ', "_(Stop) /
playing a file _Z_(Piay) / _-!! (Pause)
Device with After switching to the device, when you .....
builtin Tuner are watching a TV programme OH i ^ / [v_ button
Audio Device When Receiver is activated VOL _] / := button
MUTE button
@ The Anynet÷ function only works when the active source on the TV remote control is set to TV.
@ The button works only while in the recordable state.
@ You cannot control Anynet÷ devices using the buttons on the TV. You can control Anynet +devices only using the TV remote control.
@ The TV remote control may not work under certain conditions. In this occurs, reselect the Anynet+ device.
@ The Anynet+ functions do not operate with other manufacturers' products.
The ", operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a Samsung recorder,
1. Press the TOOLS button. Press the ENTER_ button to select Anynet + (HDMI-CEC).
2. Press the A or T button to select Recording(recorder): then press the ENTER_
button. Recording begins.
When multiple recording devices are connected, the recording devices are listed.
Press the A or _r button to select a recording device and press the ENTER_
button. Recording begins.
When the recording device is not displayed, select Device List and press the red
button to search devices.
@ Pressing the i'J button will record whatever you are currently watching. If you are
watching video from another device, the video from the device is recorded.
@ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
a recording device.