Table of Contents
Advertisement
4.
Press FORWARD to search forward
or REVERSE to search
in reverse. The VCR will locate your index mark and begin
playback. If you did not enter a specific index number, the
VCR will locate the next index mark and begin playback.
5.
Press STOP to stop index searching.
Some index marks may be missed by the VCR:
•
A mark too close to your location on the tape.
•
The mark at the beginning
of a recorded segment
of five
minutes or less.
•
The first index mark on the tape when you start at the
beginning
of the tape.
Zero Search
The zero search feature enables the VCR to quickly return to a
counter reading of 0:00:00 anywhere
on the tape. This is
especially convenient
when you want to repeat a segment of the
tape several times.
1.
Go to the beginning
of the program
you wish to return to.
2.
Press INFO twice
to display the timer counter on the TV
screen
3.
Press CLEAR to reset the counter to 0:00:00.
4.
Continue
playing the tape.
5.
Press STOP.
6.
Press SEARCH on the remote twice
to display the ZERO
SEARCH menu.
7.
Press REVERSE to return to 0:00:00 on the tape.
ZERO
SEARCH
Current
tape
counter
2:17:25
Press
REV
to
go
to
0:00:00
Press
SEARCH
to
exit
ZERO
SEARCH
Searching
for
0:00:00
Press
STOP
to
cancel
is
3O
Advertisement
Table of Contents
