Table of Contents
Advertisement
Zero Search
The Zero Search feature enables the VCR to quickly return to a
counter
reading of 0:00:00 anywhere
on the tape. This is
especially
convenient
when you want to repeat a segment
of the
tape several times.
1.
Go to the beginning
of the program
you wish to return to.
2.
Press CLEAR to reset the counter to 0:00:00.
3.
Continue
playing the tape.
4.
Press STOP.
5.
Press SEARCH on the remote twice
to display the ZERO
SEARCH menu on the TV screen.
6.
Press REVERSE (REV) to return to 0:00:00 on the tape.
7.
Press STOP to stop Zero Searching.
ZERO
SEARCH
Current
tape
counter
2:17:25
Press
REV
to
go
to
0:00:00
Press
SEARCH
to
exit
ZERO
SEARCH
Searching
for
0:00:00
Press
STOP
to
cancel
Js
Time Counter
The time counter shows the actual time it takes to record a
program
or play back a segment
of a recorded
tape. It helps
locate the beginning
or end of programs
you taped. The time
counter resets to 0:00:00 whenever
the tape is ejected from
the VCR.
For example,
if you record a 30-minute
program
at the
beginning
of the tape and you want to go to the end of that
program
to begin another
recording,
you would:
1.
Press INFO twice
to display the time counter.
2.
Press CLEAR to reset the time counter to 0:00:00.
3.
Press FORWARD (FWD) to forward
the tape until the time
counter
reads 0:30:00.
.
.
Press STOP. This is the approximate
end of the program.
(You may want to press PLAY to verify.) Now, you can begin
recording
at this spot.
Press INFO to remove the time counter from the screen and
return to the normal
display mode.
Hours
Minutes
0:30:00
I
38
Advertisement
Table of Contents
