Table of Contents
Advertisement
AUDIO
1
Reception:
STEREO
2
Tape
Playback:
HI-FI
0
Exit
Now you are ready to select an item from the menu to set up.
Reception
Some TV programs are broadcast with stereo audio or a second
audio program
(SAP) which offers a second language.
The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between
Reception: STEREO, MONO,
and SAP.
•
Select STEREO for normal or stereo broadcast
TV recording.
•
Select MONO if the stereo signal is weak and the sound is
too noisy.
•
Select SAP to record a second audio program
instead of the
normal audio on both the hi-hi and linear tracks.
Tape
Playback
The VCR records the same audio on both the Hi-Fi and linear
tracks on the tape. Hi-Fi sound is recorded on separate left and
right stereo channels. Monaural
sound is recorded on the linear
track. Press 2 to switch between
Tape Playback: HI-FI, LINEAR
and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television
or
amplifier/receiver
using the audio/video
jacks. The Tape Playback
feature
lets you select which audio you play back.
•
Select HI-FI to play back sound recorded
on the Hi-Fi track
and for normal use.
•
Select LINEAR to play back the sound recorded on the linear
monaural
track, such as a second audio program
(SAP), or a
dubbed voice-over.
•
Select MIX to play back the sound recorded
on both the
linear track and the Hi-Fi track, sound-on-sound.
33
Advertisement
Table of Contents
