On-Screen Displays; Audio Set-Up Features - GE VG4271 User Manual

.
3.
.
.
Press CLEAR to reset the time counter to 0:00:00.
Press FWD to forward the tape until the time counter
reads 0:30:00.
Press STOP. This is the approximate end of the program.
(You may want to press PLAY to verify.) Now, you can
begin recording at this spot.
Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
On-screen Displays
The INFO button shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
.
2.
.
Press INFO to see the on-screen displays.
Press INFO again to have only the time counter remain
on the screen.
Press INFO again to have no displays appear on the
TV screen. This is useful for dubbing tapes.
Turning off the VCR also resets the displays.
Audio Set-up Features
The audio setup features enhance your tape playback and
recordings. The features in this section are accessed through the
AUDIO menu and are shown in the displays below.
1. Press MENU to display the VCR MAIN MENU.
1
2
Stop Ch 05 0:30:00
11/28/99 Sun I:30PM SLP
On-screen display (times ou_
0:30:00
I
.ouRs--_J [
MINUTES
SECONDS
Time counter only
(does not time out)
3
No displays will appear
(useful for dubbing)
VCR MAIN MENU
1 Timer Recodings
2 Time
3 Channels
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 6to display the AUDIO menu.
(Continued on next page)
32