Table of Contents
Advertisement
VOL UP/DOWN
Adjusts the audio volume.
DIGIT KEYS (0 - 9)
Use the digit keys to'tune directly to a
channel. If you are in the menu system, use the digit keys to
enter numbers for the time, date, channel and passwords
INPUT
In TV and VCR mode, pressthe INPUT button one or
more times to toggle through the available video inputs.
ANT
Lets you switch the source of the video signal from DSS ®
satellite signals to an off-air antenna or cable signal.
TRANSPORT Buttons
(REVERSE, PLAY, FORWARD, RECORD,
STOP, PAUSE)
Use when controlling an a_xiliary*device, such
as a VCR or Laserdisc player. Note that the RECORD button is
used to schedule a timer recording when using a program guide.
PROGRAMMING
THE
REMOTE
CONTROL
The DSS ® remote can be programmed to control most brands of
remote controllable TVs, VCRs, and cable boxes. The remote is
programmed to control most RCA, GE and ProScan TVs and VCRs.
The remote needs to be programmed to control other
manufacturers'
brands.
Using the Remote
to Control
a Second
DSS ®
Receiver
The remote can control two DSS® receivers. From the Main menu,
select Options, then System Options, then Remote Setup. Choose
which button,
DSSl or DSS2, will control the DSS ® receiver.
Changing
the RF Remote
code
The remote can control the DSS® receiver using both IR (Infrared)
signals and RF (radio frequency)
signals. IR signals require line of
sight to the receiver's front
panel remote sensor. RF signals can
control the receiver from other parts of your house-even
through
walls.
Occasionally, due to interference or other RF devices, you may
need to change the remote and receiver RF code. Change the
code in the System Options menu.
63
Advertisement
Table of Contents
