Table of Contents
Advertisement
SELECTING
A VCR TYPE
When you connect a VCR Controller, you need to tell the DSS ®
receiver which VCR brand you are using.
1.
PressMENUeSELECT on the remote to bring up the Main
menu.
2.
Point to Options and press MENUoSELECT.
3.
Point to System Options and press MENUoSELECT.
4.
Point to Set VCR Type and press MENU.SELECT.
.
.
The set VCR Type screen lets you enter a code for
your VCR.
Use the arrows or digit keys to input the correct code for
your VCR brand. The VCR codes are located in the
"Reference"
section of this book.
Follow the on-screen instructions to ensure that you are
using the correct code. If the VCR automatically
stops, then
you know that the receiver and the VCR are communicating.
Some VCR brands may not be capable of being controlled by
the DSS ® receiver..
15
Advertisement
Table of Contents
