The Dish Pointing Menu Screen - RCA DSS1 User Manual

THE DISH POINTING MENU SCREEN
Follow these steps to obtain your dish pointing coordinates:
1. Turn on your television and satellKe receiver.
2. Tune your television to the satellite receiver's output channel.
3. Press MENU-SELECT on the remote or front panel to bring up
the Main menu.
4. Use the arrows to highlight the "Dish Pointing" option, and
then press MENU-SELECT to access the dish pointing screen.
NOTE: The menu screen that you see may be slightly different
from the one pictured here,
5. Use the arrows on the remote or the front panel to highlight
"Zip Code" and then press MENU.SELECT.
6. Enter the zip code for the dish installation location.
7. Record the elevation and azimuth numbers below.
Elevation Azimuth
t
r 5,,
Elevation isthe upl
down angle that the
dish ispointed.
Azimuth is side to
side direction that
the dish is pointed.
You only need to use one of the
available methods to find your
dish pointing coordinates. If you
know the zip code for the locality
where the dish is being installed,
use that•
k
52