Put Channels Into Memory; (Auto Channel Search); Set The Signal Type (Optional); Add Or Remove Channels From - RCA T13072 User Manual

Startup
9. Put
Channels into Memory
(Auto
Channel
Search)
A. Press MENU on the remote to display the TV!VCRMAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 1 to start AUTO CHANNEL SEARCH.
B,
Allow the TV/VCR to search for all channels. Pressing any buttons
during Auto Channel Search will stop the search and only some
channels will be in the TV/VCR's memory. When the search is
finished the TV/VCR will automatically tune to the first channel
in the channel memory list.
10. Set the Signal Type (optional)
The TV/VCR automatically selects the signal type (cable or antenna}
when you run the Auto Channel Search in step 8. If you want to
change the signal type, follow the directions below.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press5 to toggle the Signal Type between ANTENNA and CABLE.
• Afler changing the signal type, you may need to re-enter the
channel number you are trying to receive.
• After changing the signal type, you may need to Auto Channel
Search again.
TVIVCR MAIN MENU
Screen
Time
Timer Recordings
Parental ControLs
Setup
SETUP
I Auto Channel Search
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
TVIVCR MAIN MENU
Screen
Time
Timer Recordings
Parental Controls
Setup
SETUP
I Auto Channel Search
2 AddlRemove Channels
3 Set Auto Repeat
4 Auto Play: ON
5 Signal Type: CABLE
0 Exit
TV/VCR MAIN MENU
I Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
Auto Channel Search
Add/Remove Channels
ADD/REMOVE CHANNELS
11. Add
or remove channels from the
TVNCRrs memory
You may want to add or remove channels if some of them are not
active, have weak signals, or you do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing the remote control's number buttons.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 2 to display the ADD/REMOVE CHANNELS screen.
D. Follow the directions on the screen to add or remove a channel.
E. Add or remove more channels by entering the channel number or
pressing CHAN up or down.
Channel 10
is presently ADDED
Press CLEAR to remove
Press MENU to exit
4