Table of Contents
Advertisement
Operating
Instructions
To
Play
a Tape
Safety Tab
16
1.
Insert
a tape in the TV/VCR.
The TV/VCR
automatically
turns
on. The tape
automatically
begins
to play if the safety
tab on the
cassette
has been
removed
and
the Auto Play feature
has
been
turned
on.
2. Press P LAY,if necessary,
The word PLAYand the time counter appear on the
screen.
3.
If necessary,
while the tape is playing,
press TRACKING _i,
or v on the remote or CHAN up or down on the TV/VCR
to remove any streaks from the picture. Details are on page
18
4,
5.
Press STOP on the remote or STOP/EJECT
on the
TV/VCR
to stop playback.
Press REW to rewind the tape. If the VCR is playing a tape
when the REW button is pressed, the TV/VCR will search
backwards through the tape. If the REW button is pressed
while the TV/VCR is not playing a tape, the tape will
rewind back to its start,
• After Ihe tape reaches its end during playback, it will
automatically rewind back to the beginning of the tape
and eject the tape.
• Pressing the remote's POWER button while the tape is
rewinding will not stop the tape. The tape will continue
to rewind until it reaches its beginning, and then the
TV/VCR will turn off.
6. Press FF to advance the tape. If Ihe VCR is playing a lape
when the FF button is pressed, the TV/VCR will search
forward through the tape.
7. Press STOP/EJ ECT on the TV/VCR to eject the tape once
it is completely rewound.
A cassette may be ejected if the power is turned
off.
Advertisement
Table of Contents
